How Much Do Roof Racks for a Jeep Cost?

Enhance the aerodynamics and offer additional weather protection for your Jeep with a roof rack. However, as you can imagine, roof racks aren’t going to come super cheap. So, what is the price that one can expect to pay for a Jeep roof rack?

This can be broken down into two different sections. One section will focus on the actual cost of the roof rack itself, where the other section will focus on the cost for the roof rack’s installation on your Jeep.

Roof racks are frequently fitted to pre-existing Jeep’s as aftermarket installations. This can indicate that installation costs can vary based on the make, model, and size of your Jeep.

Alright, let’s go ahead and break down some of the pricing associated with roof racks that are made for Jeeps.

RoofRackforJeep.com - How Much Do Roof Racks for a Jeep Cost

Roof Rack for Jeep Prices

The easiest way to figure out the potential cost of a Jeep’s roof rack is to break it down into the different types of roofs that come standard on a Jeep. And when it comes to Jeep roofs, there are roughly 5 different types.

Because each of these designs calls for a somewhat unique approach, take a look at the pictures that follow and read on for more information about the pricing ranges that are available for roof racks that are compatible with your Jeep.

They are as follows…

Naked Roof Racks – This basically just means that you don’t have a roof.

Flush Rails (or Fixed Points) – Jeeps with a rail system running front to back of the Jeep’s roof where the rails are flush with the roof.

Raised Rails – Similar to flush rails, except these rails on the Jeep are a bit raised off from the roof.

Pre-Existing Cross Bars – Some Jeeps come with pre-installed cross bars. With this roof rack system, you are ready to start adding accessories to it.

Truck Bed and/or Canopy – The Jeep Gladiator for instance can have a roof rack system mounted onto the cab.

A Jeep With a Naked Roof Or Fixed Points

A fit kit (this is what secures the rack system to your particular Jeep), a foot pack, and load or cross bars are the three components that are often required for bare roof racks. There are a few more temporary out-of-the-box solutions available; but, these choices were unquestionably developed with a view toward lighter and less regular usage in mind.

Typical Price Range:  $199 – $740

Jeeps With Flush Rails (or Fixed Points)

A Jeep equipped with flush rails has a rail system that extends from front to rear along the roof of the Jeep. There is no gap between the roof and the rail in this configuration. In general, you will need three components, including a fit kit (which secures the rack system to your particular Jeep), a foot pack, and load or cross bars.

Typical Price Range:  $485 – $740

Raised Rail Roof Types on a Jeep

A great number of cars are equipped with elevated rails, which consist of a rail that runs from front to rear on the roof of the Jeep and a gap between the rail and the roof. This configuration offers the most flexibility and is also the most cost-effective alternative because it usually only requires a system with one or two components because the rails are so adaptable to a wide variety of uses.

Typical Price Range:  $189 – $530

Jeeps with Pre-Existing Cross Bars

RoofRackforJeep.com - Jeeps With Pre Existing Crossbars

Some automobiles come factory equipped with cross bars already attached. This indicates that you are prepared to install attachments such as ski carriers, cargo bins, bike racks, and a variety of other options. There is no need to purchase after market cross bars UNLESS you are looking to increase the weight capacity or width of your rack, or unless you have accessory specific fitting needs such as those required by the Malone Telos Load Assist. In all other cases, there is no need to purchase after market cross bars. Be aware that the maximum weight ratings of certain factory fitted crossbars are much lower than those of their equivalent aftermarket replacements. For information on weight ratings and restrictions on factory fitted roof racks, please refer to your owner’s handbook or speak with your local Jeep dealer.

Jeep’s with Truck Beds & Canopy Racks (Think Jeep Gladiator, etc.)

Typical Price Range:  $320 – $1600

Roof Rack for Jeep Installation

It might be pricey to buy or install a roof rack. The typical price is between $500 and $1,200. To save a little money, you could instead consider purchasing a pre-assembled roof rack.

These kits often include all of required components, such as brackets, fasteners, screws, and assembly instructions.

An alternative to buying a roof rack is to rent one. Depending on how long the rental is needed for, rates might range from $50 to $100 each day.

If a roof rack is not installed properly, it might be unsafe. Before installing any roof racks, remember to follow these safety precautions:

When mounting a roof rack, always lift objects safely. Make sure your hands are away from the lift platform’s edges while you are lifting something off the floor. Ensure that someone else is carrying the weight as you work as well.

Never attempt to install something on your own. Always work with an experienced installation who is a professional. Never try to drill holes in your Jeep’s floor or ceiling. Serious harm might ensue from doing so.

Keep this in mind if you intend to install a roof rack in an area where there may be a lot of debris, such snow or ice.

Place heavy items away from locations that will accumulate trash. Make sure the area around the mounting points is clean and well-cleared of any dirt as well.

Whatever technique you decide to choose, keep in mind to adhere to the manufacturer’s installation instructions.

For many Jeep models, roof racks are a necessary improvement, but how much do they cost to purchase? We made educated assumptions about how much roof racks and other equipment would cost.

The average price of a roof rack is influenced by a number of variables. Pricing is influenced by factors like Jeep type (small pickup vs. SUV) and material choices (aluminum vs. steel racks), for instance. And compared to other manufacturers, some provide more or less small features.

Benefits Of Jeep Roof Rack Use

RoofRackforJeep.com - Benefits of Jeep Roof Rack Use

You must choose between a single, dual, or multi-functional roof rack before using one.

Your load capacity increases with special-purpose roof racks. You can carry heavier weights if you simply attach your frame to one side of the Jeep.

On the other hand, you will no longer have access to the passenger area. Single-use roof rails can further decrease fuel economy by obstructing the Jeep’s airflow.

You get the advantages of both fixed and single-purpose roof racks with dual-purpose roof racks.

More substantial loads can be transported than with single-purpose or fixed roof racks thanks to dual-purpose racks that attach to both sides of the Jeep. With a dual-purpose rack, you won’t be able to reach the back seat, though.

Because they don’t restrict access to the passenger compartment like single-purpose racks do, fixed roof racks provide the most adaptability.

Furthermore, fixed roof racks offer great storage capacity and frequently hold numerous bikes. Once you’ve taken them out of the Jeep, they’re also simpler to move about and store.

Roof rack prices: steel vs. aluminum

In general, aluminum roof racks are less expensive than metal ones. However, aluminum roofs are prone to scratching quickly and need special installation care. Additionally, over time, aluminum racks frequently corrode.

On the other hand, steel is more resistant to harsh weather and temperatures than aluminum. Compared to their plastic equivalents, metal roof racks are stronger and have a longer lifespan.

Aluminum racks are less costly than steel racks, nevertheless. Depending on the design and materials used, steel rack prices can range from $100 to $600 per rack.

Some even cost thousands of dollars. Therefore, you should think about the cost before making a purchase if you intend to add a roof rack to your current Jeep.

Components of Roof Racks

There are several options available when purchasing a roof rack, including steel, aluminum, and composite materials. Each choice has its own advantages and disadvantages. Here is a brief summary of some of the key distinctions between each category.

Metal Jeep Roof Racks

RoofRackforJeep.com - Metal Jeep Roof Rack

The most common metals used to construct roof racks are extruded aluminum or stainless steel. Typically, these racks come with pre-cut holes that let you fasten them to the Jeep’s body.

Once attached, the rack is kept in place by a locking mechanism that stops it from moving about the Jeep. You may link the rack to the trailer hitches on your truck or trailer by using some metal roof racks that also have an integrated hitch receiver.

If you want a strong, reliable roof rack that performs well at high speeds yet is resistant to damage, this kind is perfect. Metal racks, regrettably, may not be particularly attractive.

Many individuals favor composite racks’ svelte designs, especially ones constructed of carbon fiber. Composite roof racks often weigh less than metal roof racks and provide better corrosion prevention.

Fiberglass Roof Racks

Similar to metal racks, composite racks can be composed of stainless steel or aluminum. Instead than using an extrusion process, composite racks employ an injection molding technique.

This produces stronger, less brittle materials that can withstand ripping and cracking. The finished product is a sturdy, long-lasting rack that is lightweight.

Composite racks are more difficult to attach on automobiles than metal ones are. These kinds of racks require equipment to install since you have to drill holes on the Jeep’s roof.

Additionally, composite racks weigh a lot more than metal racks. For this reason, many owners decide to take the rack off their Jeep when they park it.

The Conclusion to Roof Rack for Jeep Pricing & Installation Costs

In summary, there isn’t a single optimum material for every circumstance. Roof racks made of steel, aluminum, and composite materials are excellent for many uses.

Although metal racks are inexpensive and provide the most flexibility, some owners might find them ugly.

Although composite racks are bulky and challenging to install, several customers like their longevity and sturdiness.

Check out the main (and super detailed) Roof Rack for Jeeps guide here:  All About Roof Racks for Jeeps

Leave a Comment